Instructions
1.
Adhere the adaptor on where your lock is. (Fig. 3)將背膠墊片貼在
要上鎖的物體上
2.
Loop the cable around any convenient, immovable object such as
the leg of table or
desk, handle of drawer……as shown. (Fig. 2)
將鋼繩如附圖的繞過一固定物體如桌腳,
抽屜門把….等
3.
Insert key to lock and turn to open position. (Fig. 3)將鑰匙插入鎖頭上,
轉至開啟狀態
4.
Insert lock into square hole on the spacer, hold the lock body by
the other hand, press in and turn key to lock position. (Fig. 4)
將鎖頭插入此墊片的方形孔上,
壓入方形孔同時轉動鑰匙制鎖閉狀態,
此時完成上鎖 |